Your dashboard services.
Register to access all tools.

Measuring Devices, Tools, Accessories

Lightning strike counter for recording discharge currents. Measuring equipment for checking earthing systems. Accessories for straightening round and flat conductors. Insulating and corrosion protection materials for clamping points/connections in the soil.

Lightning Strike Counter

Counter for digitally recording impulse currents.

The discharge current counter is preferably installed between the equipotential bonding bar and the earth-termination system.

Earth Resistance Meter GEOHM C

For measuring the resistance to earth and the soil resistvity, with automatic selection of the measuring range and checking of sensor and auxiliary earth-electrode resistance.

Earth Resistance Meter Metraclip Earth

For earth loop measurement.
Easy handling, high-resolution OLED display.
Automatic calibration, Bluetooth interface incl. software.

EP4 Continuity Tester

Continuity tester for measuring the resistance of e.g. air-termination and down conductors and subsequently installed reinforcing bars of buildings. The tester is suited for measuring the resistance of earth-termination systems according to DIN 18014 with a test current of 200 mA.

Case with Measuring Accessory for Continuity Tester

For storing the continuity tester and measuring accessories.Equipment includes:
  • 2 coilers with unwinding handle and 50 m measuring line, blue, with banana pin, Part No. 585 320
  • 1 measuring line 0.75 mm², 3 m long, black, with banana pin on both sides, Part No. 545 020
  • 1 test clamp, clamping range 2-21 mm, Part No. 588 000

Earth Resistance Measuring Equipment in a Case

Case with shoulder strap for easy transport.Equipment includes:
  • 1 coiler with unwinding handle and 25 m red measuring line with banana pin, Part No. 585 310
  • 1 coiler with unwinding handle and 50 m blue measuring line with banana pin, Part No. 585 320
  • 2 auger drills, 350 mm long, Part No. 587 460
  • 2 black measuring lines 0.75 mm², 3 m long, with banana pin on both sides, Part No. 545 010 (connection between earth-termination system and earth resistance meter)
  • 1 red measuring line 0.75 mm², 0.5 m long, with banana pin on both sides, Part No. 545 010
  • 1 blue measuring line 0.75 mm², 0.5 m long, with banana pin on both sides, Part No. 545 011 (connection between coiler and auger drill)
  • 1 test clamp, clamping range 2-21 mm, Part No. 588 000
With storage compartment for Metrel MI 3123 or GEOHM C measuring device.

Wire Straighteners

For straightening round conductors of different materials (semi-rigid).

Straightening Tool

For bending and straightening of conductors.

Support tool

Aluminium support tool with safety bow made of stainless steel, for concrete bases of 8.5kg and 17kg.

Spider Wrench

Universal use for installing lightning protection systems. With four wrench sizes.

Anti-Corrosion Tape

For the corrosion-protective insulation and enclosure of above-ground and underground connections, such as clamp and screw connections in the field of earthing and lightning protection, but also for the subsequent enclosure of welded seam areas and formed parts as well as sleeves, flanges, fittings, etc.The petrolatum-coated lining on both sides effectively prevents the penetration of dirt and moisture.
  • Quick and easy to use
  • Strong adhesion
  • Stays permanently plastic
  • Exceptional electrical insulation
  • Does not contain any substances harmful to people or the environment

Heat-Shrinkable Sleeve

Heat-shrinkable sleeve for coating Rd and Fl conductors, e.g. when leading terminal lugs out of the concrete or earth entries out of the ground.
UV-stabilised, customised length.

Your dashboard services.
Register to access all tools.

Notepad
Request a risk assessment
back to top